tparty8™ Pressure Analyzer is a PC-based diagnostic tool used in Design, Testing, and Evaluation of Close-Fitting Apparel (e.g. brassieres, compression stockings, etc.). The instrument is Lightweight, Portable, and can be attached at the waist (belt or fanny pack). The Software Runs as a COM (DLL) add-in to Microsoft Excel (versions 2000 to 2007) running under Windows 2000, XP, Vista, or 7. Data is acquired directly into worksheet columns in a Microsoft® Excel workbook. Standard Features:

  • Non-destructive, Non-invasive, and Easy To Use
  • Acquires 8 channels of Pressure/Force data for Each Test Run
  • 12 bit Highspeed, Interrupt-Driven, Data Acquisition
  • Runs, Collects & Processes Data Directly In Microsoft® Excel
  • Microbore Transmission Tubing Allows Up To 48 inches or more between the Bladder Detectors and Solid-State Pressure Transducers
  • Standard length for Transmission Tubing is 30 inches
  • Determines 5 Diagnostic Parameters Per Channel automatically (see Definitions of Parameters, below) for each Test Run
  • Performs FFT Analysis On Acquired Data For Any Channel Selected
  • Does Automatic Two Point Electronics Calibration for Each Channel.
  • Permits Two Point Pressure Calibration For All Channels Simultaneously (fast and convenient) over User Selected Pressure Range.
  • Ships With Nine Port Pressure Chamber attachment, used when doing Simultaneous Pressure Calibration for Channels *
  • Maximum Pressure Range 0-120 mmHg (Standard). Pressure Range can be extended (special order)
  • Windows Software that Runs on Notebooks or Desktop PC's
  • Good Technical Support and Free Software Updates

* Note: Standard bulb-type Sphygmomanomter and T-Fitting (see picture below) , and usb powered hub (not shown) are also required and must be purchased separately from Commercial Suppliers.

Price List

tparty Pressure Analyzer 2.0 System
Includes:
  • tparty8™ Pressure Analyzer
  • USB 2.0 Certified A-B Cable - 6 ft
  • Nine(9) port Pressure Chamber Calibration Attachment
  • Eight (8) bladder detectors - size-mix user specified
  • tparty8™ Windows Program Demo CD
  • tparty8™ Windows Program Install CD
  • tparty8™ Instruction Manual (pdf)

Cost: $2,195 + tax + shipping charges
Note: Bulb type Sphygmomanometer and T-Fitting, and usb powered hub needed for calibration and operation are not provided.

All prices are subject to change.

Specifications (subject to change without notice)

1. Electrical
Voltage +5, supplied by suitable usb powered hub
Frequency 50/60 Hz

2. Assembly Size
tparty8™ Pressure Analyzer 5.34"L x 3.24"W x 1.96"H / 0.44 LB.
USB Cable 6 feetL /terminated with std A and B plugs

3. Operating Temperature 16 deg C to 32 deg C

4. Computer Requirements (minimum) Note: Neither the computer nor the powered hub are provided
Laptop or Desktop Computer /Microsoft Windows* 2000 or Later version of Operating System. Microsoft Excel* 2000 or later version.
IBM Compatible / 1-2.0 USB Port Free/USB 2.0 Powered Hub
CPU Pentium III or Equivalent
512 MB RAM
20 GB Hard drive
CDROM drive
SVGA Color Monitor

5. Program
COM Addin DLL provides dropdown menu in Excel. Instrument Runs as Add-in to Excel.
Simple Install Procedure on CD /Free Program Upgrades.
Raw and processed data stored directly on Excel Spreadsheets/Display Volts, Pressure in mmHg or psi, Manual FFT analysis. Standard Models for Fitting/Processing Raw Data/ Development of Custom Program Modifications Offered.

6. Signal/Data Acquisition
Eight (8) Bladder-Type Pressure Detector Inputs (each 0-120 mmHg, Max.) , 12 bit A/D Conversions, Automatic Data Acquisition and Storage, User-Selected FFT Processing and Charting, , Automatic Two-Point Electronic Calibration, Two-Point Calibration over User Selected Pressure Range.

* Microsoft Windows and Microsoft Excel are registered trademarks of Microsoft Corporation